Jiaozuo Fengshen tire retreading Limited by Share Ltd   

        "cushion gum detail"

said:   Ming cushion gum turned cold bonding rubber buffer, the product is applied to the cold turn between the pre vulcanized tread and carcass bonding without vulcanization.
 : This product can be applied to all turned cold intermediate pad between the pre vulcanized tread and carcass. Play a buffer, the impact force by transition tread, type into a ladder type fixed elongation stress of matching, guaranteed the tire in the case of high load uniform stress distribution, and cannot form stress poly midpoint, make the heat evenly distributed, to ensure that the service life of the tire.
should be   use: tire to tread adhesive, repair or make a mortar.
  lattice: width 250mm, thickness 1.2mm
vulcanization of three elements: the curing temperature of 130 degrees Celsius, curing time of 2 hours, curing pressure 9/cm2
package   binding: This product can be applied to all turned cold intermediate pad between the pre vulcanized tread and carcass, play a buffer, impact force Du tread by forming a ladder type fixed elongation stress of matching, guaranteed the tire under high load condition uniform stress distribution, and cannot form stress poly midpoint, make the heat evenly distributed, to ensure that the service life of the tire. This product uses the production technology and foreign high-quality long-term tackifying materials RS domestic advanced, using a table thickness gauge and viscosity control equipment with high accuracy, the establishment of a number of process control point Cengcengbaguan, strict standards to organize production in accordance with the process, make the sticky adhesive force of permanent good. Characteristics of

- products: good viscosity, strong adhesive force, good elasticity, long storage time, the stability of the product performance.
- Product Application: tire tread glue to repair mortar, or play.
- vulcanization time: curing time is 120 DEG C for 3 hours (temperature, pressure to achieve after the start time).
- product thickness: + 1.2MM or in accordance with the requirements of customers to determine.
- product width: + 250 or in accordance with the requirements of customers to determine.
- product storage: This product is suitable for the storage temperature is 30 degrees below, and avoid light, heat, pressure proof, moisture-proof, waterproof.