Beijing Zhenghong Nike Company Limited   

        non-woven special welding machine
non-woven bag welding machine   non-woven shopping bags,   non-woven shopping bag shopping bag   welding machine; welding machine   environmental protection shopping bag   environmental protection shopping bag   bag welding machine; welding machine & nbsp; non-woven bag welding machine   non-woven bag   bag welding machine;   supermarket shopping bag welding machine   non-woven shopping bag professional welding machine welding   non-woven bag, non-woven bag welding machine, welding machine of non-woven non-woven file bag, environmental protection bag welding machine, welding machine, non-woven bag, non-woven gift bag welding machine, welding machine, non-woven shopping bag, nonwoven cloth advertisement apron welding machine, non-woven bag cosmetic welding machine, non-woven fabric quality bag welding machine, welding machine
characteristics of non-woven bag of wine: one-time fuse forming, no burr, convenient change of lace wheel, various pattern, speed and preheating free, do not have temperature debugging. Function: fuse, suture, edge cutting, molding, embossing, hot stamping, punching, etc.. Application: used in chemical fiber cloth, nylon cloth, knitted cloth, non-woven fabric, glue sponge, PE paper, PE+ aluminum, PE+ fabric composites. Application: lace suits, lace underwear, flower packaging ribbon, tents, umbrellas, raincoats, tablecloths, handkerchief, non-woven mask, motorcycle helmet, arts and crafts etc.. 超声波花边缝合机型号规格输出功率：1500W 熔断速度：5-20M/MIN 频率20KHZ 熔断宽度：75MM 电源：220V/6A 机器尺寸：1200*600*1100 重量：115KG 操作时注意事项： 1、模头的定期检查：（1）模头的平面与花轮的平行度要定期检查，一般要求它们的平行度小于0.02mm,若超出此标准须调整后再工作. (2)模头的工作面若出现磨损产生凹痕,导致工作出现织品熔断不畅现象,就须将模头卸下将工作面研磨
平后再装上工作. 注意:模头出现不平可经几次研磨,但研磨量几次累积不得大于2mm,否则模头会因工作频率产生变化且表面硬化层消失而报废. (3)模头与超声发生器总成工作频率匹配的检查: 注意：每天上班前，应先检查此项。 The method is: open the power switch, then the reactionary test switch board to "ultrasonic test" direction, to observe if one of a row of the phenomenon should be corrected frequency:   A, gently touch work die head face feel ultrasonic amplitude of weak   B, resulting in abnormal noise   C, the die head is abnormal hot   D, generator assembly swing too large amplitude adjustment method of current meter panel and use "a" head screwdriver tuning
device on the panel, grid trimming correction frequency (typically clockwise and counterclockwise adjustment of not more than 45o), adjusted to the ammeter pointer minimum and the above phenomenon disappeared. If the correction is still unable to work, do not set foot pedal switch, and the power supply is cut off to stop working, or it will damage the equipment.   2, flower round check: round flower pattern must be kept sharp state, the hardness remains in Rockwell 50-55 degrees. Inferior has wear, rust contact flowers round may not use, so as not to affect product quality or error plus flower wheel pressure leads to the accelerated wear of die head.   3, pressure control: machine required in the work of the pressure is generally in accordance with the following factors: (1) round flower pattern is more complex, must be slightly increased pressure. (2) round flower pattern less sharp, be slightly increased
pressure. (3) the acoustic amplitude die head is small, to slightly increase the pressure. (4) the processed material containing chemical fiber fabric, higher volume (such as NYLON) pressure can be smaller, and vice versa (such as IC cloth) pressure must be slightly enlarge. (5) the processed fabric thickness, the thicker fabric to slightly increase the pressure. (6) the different processing speed, high speed should be slightly increased pressure. Note: if a country's industry product quality problems arise, please find out the influence of quality, not by increasing the floral wheel pressure to solve. Because of the simple pursuit of pressure to solve the problem, extremely easy to cause the die surface or round flower patterns medium wear and cause other problems, therefore, as long as the processed products of good quality, pressure is as small as possible.   4, the ultrasonic generator assembly panel ammeter current equipment in the no-load indicator pointer is greater than 1.2A, said or abnormal frequency offset generator, downtime correction frequency or checked after using.  5, the ultrasonic generator assembly to the rated input voltage stability is more sensitive to suggest an electronic automatic voltage regulator device.