Shaanxi million construction and Decoration Engineering Co., Ltd. million   

Shaanxi Confucian million color road construction, municipal landscape engineering department It is a special kind of high polymer resin adhesive applied to the road surface, and is coated with different colors of wear-resistant color wear-resistant aggregate. It is paved with accurate quantity. Color antiskid pavement with high friction coefficient can effectively improve traffic safety. Scope of application Color antiskid road is suitable for urban main roads and urban secondary roads, Urban overpasses and sidewalks, community roads and parking lots, etc. Construction technology: color antiskid pavement is a new pavement landscaping techniques, can make black asphalt concrete and cement concrete pavement of the traditional grey color, through the pavement construction to achieve the color with antiskid effect is good to hear or see. Construction preparation 1) to ensure that the construction of the road surface is smooth, clean and without any pollutants, no road damage; 2) clean up dirt and obstructions on the road surface; 3) proper filling can be used to repair the pit or hole (empty); 4) use appropriate cleaning agent to clean up oil or dirt on the road surface, then rinse with water and wait for complete drying before construction; 5) before construction, it is necessary to ensure that the road is dry and that the wet road can be dried by hot air compressor, especially in winter, that the road surface must be heated and the resin will be accelerated; 6) in the construction scope, use leather tape or adhesive tape edge banding, and then measure the construction scope, area, in order to calculate the amount of resin construction; 7) the optimum construction temperature of the pavement is between 15-35 degrees centigrade. 8) the new paved asphalt pavement shall be constructed at least 6 weeks before the construction of color antiskid pavement. Sequence of construction (manual construction) 1, after the road construction is over 2, set marking, road cleaning 3, according to the design drawings required baseline 4 、 location of lines 5, after supervision engineer inspection for construction 6 surface treatment and cleaning 7, surrounded by good adhesive tape 8. Use special tools to evenly spread epoxy resin cement on the road that needs to be painted; 9, according to the design requirements of color slip proof aggregate; 10, recovery of excess color aggregate. Basketball courts, tennis courts, artificial turf, stone series, sports venues and other plastic ground engineering design, construction, renovation and sales, construction materials with silicon PU, PU, acrylic (acrylic), polyurethane plastic and epoxy floor in Zhejiang, Ningbo, Beijing, Xi'an and other places have a field project, welcomed the consultation. Shaanxi Confucian million color road construction, municipal landscape engineering department Tel / Fax: 029- 88497791 (second line). 13909240430 Address: Xi'an City, Beilin District Friendship Road No. 46